Canon Service Tool V6000 -

If you cannot find a safe version of the V6000, consider these options:

The software is often flagged as a "HackTool" or "Trojan" by security software because it directly modifies hardware EEPROM settings. Open ServiceTool_v6000.exe . Ensure your printer is recognized in the "USB Port" field. Click "Main" in the "Clear Ink Counter" section. Click "EEPROM Clear" to fully reset the memory. Click "EEPROM" to check the status (optional). Turn off the printer and turn it back on. Important Warnings and Precautions

Resets the internal counter for the ink absorber (sponge), allowing the printer to function after it "times out" due to predicted ink saturation. canon service tool v6000

Your USB cable is loose, faulty, or connected to a USB 3.0 port that the legacy software cannot read. Switch to a USB 2.0 port. Important Safety Warning: Physical Maintenance Required

Look at the top right corner. Ensure your software detects a connected port. Locate the section. Set the Absorber dropdown menu to Main . Click the Set button located directly next to it. If you cannot find a safe version of

Right-click ServiceTool_v6000.exe and select . Look at the top section labeled Main .

Let’s be clear: The V6000 resets the counter , not the physics of ink . The waste ink pad inside your printer is still full of liquid ink. If you reset the counter twice without physically changing the pads, you will eventually overflow, causing ink to leak out of the bottom of your printer, ruining your desk and potentially shorting the electronics. Click "Main" in the "Clear Ink Counter" section

How to Use Canon Service Tool V6000 to Reset the Waste Ink Counter