Acer Ipimb-ar Rev 1.02a Manual [exclusive] Review

1 x HDMI and 1 x VGA (requires CPU with integrated graphics). USB: 2 x USB 3.0 ports and 4 x USB 2.0 ports. Network: 1 x RJ45 Gigabit LAN port. Audio: 3.5mm jacks for Line-in, Line-out, and Microphone. Legacy: PS/2 ports for mouse (green) and keyboard (purple).

Intel B75 Express, which provides native support for USB 3.0 and SATA III.

Ensure the front USB 3.0 header is plugged into the blue 19-pin header on the motherboard. Acer Ipimb-ar Rev 1.02a Manual

Turn off the computer and unplug the power cord from the wall.

The Acer IPIMB-AR supports up to 32GB of unbuffered DDR3 RAM. To achieve optimal performance via Dual-Channel mode, use the following configuration: 1 x HDMI and 1 x VGA (requires CPU with integrated graphics)

The motherboard supports processors with a thermal design power (TDP) up to .

Intel 2nd Gen (Sandy Bridge) & 3rd Gen (Ivy Bridge) Core i7, i5, i3, Pentium, Celeron Up to 95W Maximum TDP Memory Slots Audio: 3

If the system fails to boot after a hardware change, locate the CLR_CMOS jumper. Move the jumper from pins 1-2 to 2-3 for 10 seconds, then return it to the original position to reset the BIOS settings.

| You need | Look for | |----------|-----------| | Motherboard layout, connectors, jumper settings | Aspire M3400 Service Guide | | RAM upgrades, hard drive, ports, BIOS navigation | Aspire M3400 User Manual | | Drivers, BIOS, chipset drivers | Acer support for Aspire M3400 / AM3470 |