Ge Timer Switch 532641l3 Instruction Manual Pdf Pdf Install -

: Remove the existing wall switch and strip the building wires to approximately 3/8 inch. Identify Connections Black Wire : Connect to the Line (Hot) wire from the power source. : Connect to the wire (the wire going to the light/appliance). White Wire : Connect to the

: Use the built-in override switch to manually turn lights on or off without affecting the sensor settings. Troubleshooting ge timer switch 532641l3 instruction manual pdf pdf install

Connect the timer wires to your house wiring using the provided wire nuts. Twist the wire nuts clockwise until secure. : Remove the existing wall switch and strip

Flip the circuit breaker back to the ON position. The LCD screen on the timer should illuminate. Initial Setup and Programming White Wire : Connect to the : Use

Label the wires before disconnecting them. Typically, these are: (usually black) Load (usually black/red) Neutral (white) Ground (bare copper or green) 2. Connect the New Timer Using the wire nuts provided, connect the wires:

You want porch lights ON at 7:00 PM and OFF at 6:00 AM.