Free — Hks-va028-v2.0
Voltage resolution is 0.1V, and current resolution is 0.01A.
Before touching any fuel maps, enter .
Approximately 100ms to 300ms per update cycle.
module. This compact panel meter is widely used by electronics hobbyists and engineers to monitor real-time voltage and current in power supplies, battery chargers, and DIY solar setups. Overview of the HKS-VA028-V2.0 The "0.28" in the model name refers to the 0.28-inch LED display hks-va028-v2.0
💡 Add digital readouts to DIY adjustable power sources.💡 Battery Monitoring: Track the charge and discharge rates of 12V/24V solar battery banks.💡 RC Hobby Gear: Monitor current draw in drone or RC car battery systems.💡 Industrial Panels: Compact monitoring for 24V or 48V DC control cabinets. Troubleshooting & Safety
Are you this into a specific project (like a solar setup or power supply)?
Located on the back of the PCB, these allow you to fine-tune the voltage and current readings against a known accurate multimeter. Voltage resolution is 0
The HKS-VA028-V2.0 optimizes high-accuracy tracking in a small form factor. It processes real-time voltage and current lines via an onboard analog-to-digital converter, splitting the telemetry onto a stacked 0.28-inch LED display panel. Technical Parameter Specification Value DC 0.00V to 99.9V (up to 100V) Current Measurement Range DC 0.000A to 9.999A (10A max with internal shunt) Display Window Dual 0.28-inch 3-digit/4-digit LED panels Refresh Rate ~200 milliseconds per cycle Measurement Accuracy ±1% (+/- 2 digits) Operating Current < 20mA total load Panel Cutout Dimension 45mm x 26mm Total Framework Footprint 48mm x 29mm x 26mm Pinout and Wiring Harness Architecture
Roughly 48mm x 29mm x 26mm (standard panel cutout size) Wiring and Pin Configuration
Voltage measurement input. Connect this to the positive side of the device you are measuring. Thick Wires (Current Load) module
Схема подключения Вольтметр-Амперметра DSN-VC288
So, what makes the HKS-VA028-V2.0 so special? Here are some of its key features and benefits: