Vw Polo - 6n Dashboard Removal Updated

Disconnect the negative battery terminal. Wait 10 minutes for the airbag system (if equipped) to de-energize.

If equipped, this unit is bolted to the dashboard's internal metal cross-member. Be extremely careful with the yellow connectors. 4. Final Dash Release Side Screws:

Always remove the negative terminal and wait at least 10 minutes before touching airbags to allow the system to discharge. vw polo 6n dashboard removal updated

Lay the wiring harness exactly as it was originally positioned. Use cloth wiring tape or zip ties to secure loose cables; otherwise, they will create annoying rattles while driving.

Open the glove compartment, unscrew the retaining fasteners lining the top and bottom interior edges, and pull the assembly out. Disconnect the negative battery terminal

Once you've removed the trim and mouldings, you'll need to disconnect the electrical connectors that connect the dashboard components to the car's electrical system.

Open both front doors completely. Pop off the plastic end caps on the left and right sides of the dashboard. Remove the heavy-duty bolts anchoring the dashboard structure to the A-pillars. Be extremely careful with the yellow connectors

To remove the dashboard of your VW Polo 6N, you'll need the following tools and materials:

Technically, yes. Legally, no (airbag sensors, speedometer, and hazard lights are required for inspection in most places). Put the car on jack stands, pull the dash, and order the replacement part before you lose the tiny spring from the recirculation flap.

If you want to make sure you have everything ready for the job, let me know: