your printer completely, but leave the power and USB cables plugged into your PC.
1. Start with the printer powered off. 2. Press and hold the Stop button (sometimes marked with a red triangle). 3. While holding Stop, press and hold the Power button. 4. Release the Stop button while continuing to hold Power. 5. While still holding Power, press and release the Stop button 5 times. 6. Release the Power button.
The Service Tool will not detect your printer under normal operating conditions. You must manually boot the hardware into before launching the software. canon+service+tool+v4718+updated
With the printer off, hold Stop , then press and hold Power . Release Stop and press it 5–6 times (depending on the model) while still holding Power , then release both.
MG6600, MG6610, MG6620, MG6640, MG6650, MG6660, MG6670, MG6680 your printer completely, but leave the power and
A direct USB connection is required; it will not work over Wi-Fi.
Power off the printer to lock the settings, then power it back on normally. System Compatibility & Supported Models While holding Stop, press and hold the Power button
The software does not support your specific printer model.
Generates a report of the printer's status.
for backup and future reference. Wait for the printer to finish printing before proceeding.
: The updated version includes firmwares for newer Canon G-Series (MegaTank) and TS-Series models. Symptoms That Require Canon Service Tool V4718