You need the Canon Service Support Tool (SST) and the specific firmware for the iR2016/2020 series.
navigation steps to clear the E000-E003 fixing errors that sometimes accompany this state? DOWNLOAD MODE*** Waiting - Frozen ImageClass D530 Printer
Sometimes, the copier is simply confused by a temporary power glitch or a stuck button on the control panel.
Canon imageRUNNER 2016 (iR2016) Report Subject: Verification of "Download Standby" Error Status: VERIFIED / CRITICAL FAULT DETECTED
: A voltage drop or premature disconnection during a machine update forces the device into a permanent safe-mode loop. canon ir2016 download standby error verified
It sounds like you’re referring to a technical issue with the where the device gets stuck in a “download standby” or “download mode” error — often related to firmware corruption, a failed update, or a bad system software load.
Canon ImageCLASS MF6590: Resolving 'Downloading Standby' Issue
Reattach the basic power infrastructure, boot the machine, and attempt to run Verified Fix 2 again. If the chip was loose, SST will now complete the write process flawlessly. Summary of Troubleshooting Paths Probable Cause Verified Action Screen says "Download Standby" right after a power outage. Corrupted system software cache. Perform Verified Fix 1 (Hard Power Reset). Copier enters loop even after key cleaning. Main system file is missing or corrupted. Perform Verified Fix 2 (Reflash via SST Tool).
It's important to know when to call in a professional. If you do not have access to the necessary tools (SST, firmware, downloader PCB) or are not comfortable with the internal hardware procedures, it is best to seek help from a qualified technician. Attempting to fix the issue without the proper knowledge and tools could lead to further damage. You need the Canon Service Support Tool (SST)
This is the official Canon solution. This requires a Windows PC (XP, 7, or 10 32-bit recommended) with a parallel port (LPT) or a USB-to-parallel adapter that supports bidirectional communication. Many modern adapters fail.
Yes, although less common. A failing power supply unit or a faulty main controller PCB are known hardware causes. If you have repeatedly attempted to reinstall the firmware without success, a professional should inspect these hardware components.
The most common cause. During startup, holding down specific keys on the control panel (such as 2 and 8 simultaneously) forces the copier into bootloader/download mode.
It's helpful to know that this state is actually part of the normal upgrade process. According to the official Canon service manual, technicians manually put the machine into "download standby mode" by selecting COPIER > FUNCTION > SYSTEM > DOWNLOAD in the service mode when performing firmware upgrades. The problem arises when the copier gets stuck in this mode unintentionally. This unintended behavior is what users commonly refer to as the error. If the chip was loose, SST will now
Before diving into the fixes, it helps to understand why your Canon iR2016 is trapped in this loop. The error usually stems from one of four triggers:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
What is installed on the computer connected to it?