| Mode | Code | Behavior | Best Use | | :--- | :--- | :--- | :--- | | | 19 0 # | Swipe or PIN keypad. Relay activates. | Standard office, no high security. | | Card + PIN | 19 1 # | User must swipe AND enter PIN. | High-security server rooms, labs. | | Card or PIN | 19 2 # | Either a valid card OR a valid PIN works. | Convenience stores, gyms. |
Prevents a user from swiping twice to let in a tailgater.
Enter Programming Mode -> Press 0 + [New 6-digit Code] + # + [Repeat New Code] + # . Adding Users (Card or Keyfob) Enter Programming Mode. Press 1 + [Read Card] + # . V2000-c Rfid Access Control User Manual
The V2000-C system is designed to be reliable and durable, but like any system, it may require occasional troubleshooting and maintenance. The user manual provides a comprehensive guide on how to troubleshoot common issues and perform routine maintenance tasks.
Installing and configuring the V2000-C RFID access control system requires careful planning and attention to detail. Here are the general steps involved in installing and configuring the system: | Mode | Code | Behavior | Best
Move the internal jumper (often labeled or S16 ) to pins 1-2 . Power the device on and wait for the beeps. Power off again and move the jumper back to pins 2-3 .
The delay time determines how long the lock remains open after a valid entry. Enter Programming Mode. Press 4 + [00–99 Seconds] + # . Note: 00 sets the relay to toggle mode (latched). 6. Troubleshooting | | Card + PIN | 19 1 # | User must swipe AND enter PIN
Symptom: The keypad does not respond to any button presses or card swipes. Total loss of power or incorrect input voltage.