Interesting request!
The second problem was the pinout. The PS4 Fat motherboard didn’t use the standard 24-pin connector Luis was used to. It had a strange, proprietary 12-pin header. He downloaded a blurry forum diagram from 2015. One user claimed: “Pin 1 is Standby (3.3V), Pin 7 is Ground, Pin 10 is PS_ON. Bridge Pin 11 and 12 for 12V rail.” Another user had simply replied: “RIP your console.”
Para llevar a cabo este proyecto, necesitarás:
Identifica los dos puntos de conexión en la placa base de la PS4 (donde se conectaban las patas anchas de la fuente original):
Con acceso directo a los pines de la placa base donde encajaba la fuente original.
I've searched for a paper or guide on adapting a PC power supply to a PS4 Fat, and I found a few resources that might be helpful. Keep in mind that modifying a power supply to work with a console can be challenging and potentially hazardous if not done properly.
En la zona inferior de la placa de la PS4 verás dos espadines o clavijas metálicas gruesas. Aquí es donde entraban los 12V directos de la fuente original.
Para este paso, lo ideal es cortar el cable conector de tu fuente de PS4 dañada para aprovechar la clavija de plástico y no soldar directamente a los pines diminutos de la placa.
Toma 3 o 4 de la fuente de PC y júntalos también.
Debe ser de al menos 300W para cubrir cómodamente los ~250W que consume la PS4 Fat. Destornillador Torx T8/T9 (Seguridad): Necesario para abrir la consola. Cables y Conectores:
Also, the signal: On a PC PSU, you must connect the green wire to a ground to start the PSU. For the PS4 to control power, we will instead wire the PS4’s PS_ON signal (from motherboard) to the green wire on the PSU via a small transistor inverter, because PS4’s PS_ON is active-high (3.3V to power on), while PC PSU wants active-low (ground to turn on).
Interesting request!
The second problem was the pinout. The PS4 Fat motherboard didn’t use the standard 24-pin connector Luis was used to. It had a strange, proprietary 12-pin header. He downloaded a blurry forum diagram from 2015. One user claimed: “Pin 1 is Standby (3.3V), Pin 7 is Ground, Pin 10 is PS_ON. Bridge Pin 11 and 12 for 12V rail.” Another user had simply replied: “RIP your console.”
Para llevar a cabo este proyecto, necesitarás: adaptar fuente de pc a ps4 fat
Identifica los dos puntos de conexión en la placa base de la PS4 (donde se conectaban las patas anchas de la fuente original):
Con acceso directo a los pines de la placa base donde encajaba la fuente original. Interesting request
I've searched for a paper or guide on adapting a PC power supply to a PS4 Fat, and I found a few resources that might be helpful. Keep in mind that modifying a power supply to work with a console can be challenging and potentially hazardous if not done properly.
En la zona inferior de la placa de la PS4 verás dos espadines o clavijas metálicas gruesas. Aquí es donde entraban los 12V directos de la fuente original. It had a strange, proprietary 12-pin header
Para este paso, lo ideal es cortar el cable conector de tu fuente de PS4 dañada para aprovechar la clavija de plástico y no soldar directamente a los pines diminutos de la placa.
Toma 3 o 4 de la fuente de PC y júntalos también.
Debe ser de al menos 300W para cubrir cómodamente los ~250W que consume la PS4 Fat. Destornillador Torx T8/T9 (Seguridad): Necesario para abrir la consola. Cables y Conectores:
Also, the signal: On a PC PSU, you must connect the green wire to a ground to start the PSU. For the PS4 to control power, we will instead wire the PS4’s PS_ON signal (from motherboard) to the green wire on the PSU via a small transistor inverter, because PS4’s PS_ON is active-high (3.3V to power on), while PC PSU wants active-low (ground to turn on).