Nokia Ta1304 Flash File Pac File Fixed Today
Flashing the firmware is a last resort because it is a risky and advanced procedure. Before you follow this guide, please try these simpler solutions first, as they are both safer and faster:
To flash the with a fixed PAC file, you typically need a specialized tool that supports the Spreadtrum (SPD) chipset used in this model. Because this is a feature phone, it uses .pac firmware files rather than the standard Android .nb0 or OTA files. Recommended Tools
He was using the generic firmware file he had in his archive, version 10.01.05. It should have worked. Logic said it should have worked.
The Nokia TA-1304 runs on a Unisoc (formerly Spreadtrum) chipset. Unlike smartphones that use zip-based custom ROMs, Unisoc devices rely on a specific firmware format known as a ( .pac ). nokia ta1304 flash file pac file fixed
Flashing unofficial firmware voids your warranty. The term “fixed” refers to community patches for repair purposes. We are not responsible for permanent device damage. Always backup your QCN partition before flashing.
Click the (Load Packet) located at the top-left corner. Browse and select the extracted Nokia_TA1304_...pac file. Wait for the tool to successfully load the packet data. Step 4: Connect the Device and Flash
A compatible .pac firmware file for the TA-1304. Flashing the firmware is a last resort because
If the flash stops at 98% and shows Userdata.img error , the fixed PAC file has a modified partition size. Repack using Unipac tool – resize userdata to 4GB.
If the tool does not detect the phone, ensure Spreadtrum drivers are properly installed. Flash Failed:
| Error / Issue | Possible Cause | Solution | | :--- | :--- | :--- | | | - USB drivers not installed - Phone not in correct mode - Bad USB cable or port | - Reinstall USB drivers - Try a different key combo (e.g., Volume Up or just connecting while off) - Use a different USB cable or port on PC | | "Load Packet" button is grayed out | - Tool is not compatible with the PAC file or chipset | - Download the SPD Research Tool instead of the Upgrade Tool, or vice versa | | Error during flashing (e.g., S_FT_ENABLE_DRAM_FAIL ) | - Firmware mismatch - Corrupted flash file | - Double-check that the firmware is for the exact TA-1304 model. - Re-download the .pac file from a different source. | | Phone is still dead after "successful" flash | - Failed boot or incompatible firmware | - Try a different version of the firmware. - Check forums (like GSM-Forum or Hovatek) for specific dead-boot repair steps for your model | Recommended Tools He was using the generic firmware
The computer cannot communicate with the phone's chipset without these specialized drivers. Download and install the architecture version matching your PC (x86 or x64). 3. SPD Upgrade Tool (Research Download)
: Flashing will wipe all personal data from the device memory. Download SP Flash Tool for Nokia phones
First, you need to find the correct files. You can use tools like to download official firmware directly from Nokia's servers. Alternatively, you can find pre-packaged firmware files on various phone repair forums and websites.
Extract the downloaded USB drivers zip file. Right-click the installer file, select , and complete the setup wizard. Restart your computer to apply changes. Step 2: Extract Firmware and Flashing Tool